VW Transporter TV Bracket

£76.99 Inc VAT

Description

Our new design of VW Transporter TV Bracket – designed and produced by Vanscape to allow a VonHaus folding TV bracket to be fitted that will allow you to mount a 16″ flat screen TV to the side wall behind the driver’s seat (B Pillar) of a T5 and T6 without the need to drill new holes. The folding TV bracket manufacturer states the bracket can accept a 13-27″ TV, but we feel a 16″ TV is the ideal size.

Includes:

  • Specially designed wall mount bracket
  • VonHaus folding TV bracket with TV mounting hardware
  • 2 x rivnuts
  • 4 x M6 bolts

 


 

VW Transporter TV Bracket

 

Our new design of VW Transporter TV Bracket – designed and produced by Vanscape to allow a VonHaus folding TV bracket to be fitted that will allow you to mount a 16″ flat screen TV to the side wall behind the driver’s seat (B Pillar) of a T5 and T6 without the need to drill new holes (uses the existing holes originally for the handle in a twin sliding door van).

Holes will need to be drilled if fitting to a T4, T6.1, or any other van, or if you wanted to mount the TV bracket lower or higher on the B Pillar.

 

To fit the bracket you will need the following:

  • 2 x M6 Rivnuts (supplied). These are for mounting the wedge shaped bracket to the side of the van using the existing holes. If you wanted to fit in a different position you will either need to drill new 9mm holes, or source some suitable metal screws.
  • A rivnut insertion tool. These can be purchased from most tool shops or online, or if you’re lucky you may have a friend that can lend you one 🙂
  • 2 x M6 bolts to fit the wedge shaped bracket to the side of the van (supplied)
  • 2 x M6 bolts to attach the VonHaus TV bracket to the wedge shaped bracket (supplied)
  • 4.0mm Allen key to tighten the supplied bolts
  • You might need a drill and a 9.0mm drill bit if you wanted to fit the bracket anywhere that didn’t use the original holes, or if the holes need opening out slightly to accommodate the rivnuts.

 

Fitting is straightforward for anybody with the basic required tools and a small amount of DIY skill.

  1. Simply locate the two existing holes behind the driver’s seat on the B Pillar.
  2. Insert the rivnuts into the holes and fix in place with your rivnut tool. If they wont go through the holes easily, you will need to VERY CAREFULLY run your 9.0mm drill through the holes to open them up enough for the rivnuts.
  3. Attach and secure your new Vanscape wedge shaped bracket to the van wall using the supplied bolts which will align perfectly with the inserted rivnuts.
  4. Attach and secure your new VonHaus folding TV bracket to Vanscape’s wedge shaped bracket using the supplied bolts.
  5. Fit your flat screen TV to your VonHaus TV bracket using the supplied hardware.
  6. That’s it, you’re done!